Instrument Cables

Epsilon EClipse

Part Number Description
 ER-9861 Epsilon EClipse cell lead cable
 ER-9862 Epsilon EClipse cell stand cable
 ER-9860 Epsilon EClipse bi-potentiostat cable
 ER-9863  Epsilon EClipsecell lead cable for screen printed electrodes

PalmSens

Part Number Description
 ER-9528  PalmSens to C-3 Cell Stand Control Cable
 ER-9529  PalmSens4 Cell Stand Cable
 EW-7548  RDE-2 Control Cable for PalmSens4 and EmStat3Blue

EC Epsilon

Click to Enlarge Part Number Description
ER-9515 C-2 and C-3 Cell Stand Control cable: 5 ft. ribbon, 25 pin female-25 pin male
ER-9517 CGME Control: 5 ft. ribbon, 25 pin female-25 pin male
EW-8109 Cell Lead - W2
EW-8099 Cell Lead: 4 ft., Lemo-alligator clips
EW-1111  Cell lead - 4 channel
EW-7524 Analog Cable (LCM-1, PWR-3, RDE-1, RDE-2): 4 ft., Lemo-Lemo
ER-9514 USB Cable, 10'

BAS-100B/W and CV-50W

 
Click to Enlarge Part Number Description
ER-9525 PC: 10 ft., 9 pin female-25 pin male serial cable (replaces ER-9508)
ER-9515 C-2 and C-3 Cell Stand Control cable: 5 ft. ribbon, 25 pin female-25 pin male
ER-9517 CGME or PARC 303/303A Control cable: 5 ft. ribbon, 25 pin female-25 pin male
EW-8099 Cell Lead: 4 ft., Lemo-alligator clips
EW-7524 Analog Cable (LCM-1, PWR-3, RDE-1, RDE-2, AC Impedance): 4 ft., Lemo-Lemo
EW-7526 Control Cable (LCM-1, PWR-3, RDE-1, RDE-2, AC Impedance): 4 ft. ribbon, 37 pin female-37 pin female
VT-9505 USB to Serial Adapter

 

RDE-1/RDE-2 Rotating Disk Electrodes

Click to Enlarge Part Number Description
EW-7524 Analog Cable (all BASi® potentiostats): 4 ft., Lemo-Lemo
EW-7526 Control Cable BASi 100 series only): 4 ft. ribbon, 37 pin female-37 pin female

 

LC-4B/C Electrochemical Detectors

Click to Enlarge Part Number Description
EW-8125 LC-4C single channel cell lead
EW-8114 LC-4C dual channel cell lead
EW-8112 LC-4B single channel cell lead (early LC-4B detectors only)
EW-8110 Cable recorder lead for RXY recorders- 4 feet

LC-3C/D/E Electrochemical Detectors

Click to Enlarge Part Number Description
EW-8099 LC-3E Cell Lead
EW-8112 LC-3C/D Cell Lead
EW-8110 Recorder Lead

 

LC Epsilon

Click to Enlarge Part Number Description
EW-8111 Epsilon cell lead cable- 4 channel
EW-8119 Cable LC Epsilon cell lead- single channel

 

Power Cords

Click to Enlarge Part Number Description
ER-8498 Power Cord, UK
ER-8499 Power Cord, Continental Europe (except Italy and Denmark)
ER-8502 Power Cord, USA, 7 ft.

Glovebox Feed-through Cable

An inert atmosphere is often required for electrochemical experiments when studying oxygen-sensitive or moisture-sensitive compounds. A common means to accomplish this is to work inside a glove box. However, the leak-proof feed-through cables required for connection between the external electrochemical instrument and the internal cell through the wall of the glove box can be a problem. A relatively simple and inexpensive solution is to mount a sealed LEMO feed-through connector to the wall of the glove box (F1). The panel cutout is shown in F2, but a 12.1 (+0.1, -0) mm diameter round hole will work as well. The female-to-female feed-through connector is air-tight and has an O-ring compression seal to the wall of the glove box. A short (2ft.) extension cable (free male LEMO to free female LEMO connector) is included and must be plugged inside the glove box. This short cable is required to correct the “crossing of lines” that occurs in the LEMO feed-through connector. The feed-through and extension cables accept standard BASi® cell lead cables.

External connection between an instrument and feed-through is via a Lemo to Lemo cable. Our standard length cable (EW-7524) is 4 feet long. Longer cables are available as special order.

 

Figure 1. LEMO feed-through connector

Figure 2. Panel cutout for feed-through connector

 

Ordering Information:

Part # Description
Special Order Glove Box Feed-Through Cable
Special Order Lemo to Lemo cable, available as 6' or 8' length

Contact BASi