Calibration Station and In Vitro Testing

The Calibration Station facilitates preparation and in vitro calibration/microdialysis of up to two rodent brain probes. Look to the Calibration Station for easy probe wetting and setup of your in vitro experiments.

  • Use for initial microdialysis probe wetting and in vitro recovery determinations.
  • The Calibration Station can also be used to store probes between uses.
  • Storing the probes in ProClin150™ Preservative can minimize potential bacterial contamination during storage.

 

 

 

 

 

 

  • Probe clamps can also be used on the stereotaxic frame for stereotaxic implantation (the MD-1521 probe clamp rod is also needed).
  • Standard plastic vials fit into holes on top of the Calibration Station.
  • Vial contents are visible from the front.
  • Stainless steel pins position the probe clamps so that probes are centered and cannot touch the sides of the vial.
  • The “Transit” position hole on the station holds either a wetted rat brain probe (BR) or mouse brain probe (MBR) just prior to insertion into the animal.
  • If you are switching probes, the clamps fit on a CMA/130.

 


Calibration Station

 MD-1522  Calibration Station with 2 MD-1520 Rat Brain (BR) Style Probe Clamps
 MD-1524  Calibration Station with 2 MD-1523 Mouse Brain (MBR) Style Probe Clamps

Accessories

 MD-1520  Probe Clamp for BR Probes
 MD-1523  Probe Clamp for MBR Probes
 MD-1521  Clamp Rod for Kopf, Stoelting or AsI Stereotaxic Frame
 CF-2150  ProClin™ 150 Preservative, 100 mL - Temporarily unavailable

 

  • Content coming soon

 

  • Content coming soon